CYBEX 525T Service Manual

Toggles the display for Adding new channels or Deleting stored
channels.
Speed keys6
Increase or decrease volume.Volume keys7
Scans for available TV transmitters.Display option key8
Plug in headphones to listen to channels.Headphone jack9
Stores and exits setupSTOP key10
Toggles near/far for UHF receiver sensitivity.Setup key11
Enters menu, accepts value shown, moves forward in menu.Enter key12
Navigates TV channels.Up/Down keys13
Setup UHF Transmitters
1.
Press and the hold the Display option and UP keys for 3 seconds.
Display will show time setup.
2.
Press Down to navigate to the A/V setup screen.
Press the ENTER key.
3.
Press the UP and Down keys to select UHF.
4.
Press the ENTER key.
5.
Press the ENTER key again to change transmitter type.
6. Press Quick Start to select your transmitter type from the available choices. The display will only
show choices available under your transmitter type (900 MHz, 863 MHz or 806 MHz).
Page 33 of 199
Cybex 525T Treadmill Part Number

CYBEX 525T Specifications

General

Brand	CYBEX
Model	525T
Category	Treadmill
Language	English