9.
Press to select Channel Map.
10.
Press to start auto programming.
A confirmation menu will appear before proceeding.
11.
Press (Yes) to start auto programming.
Press (No) button to cancel the operation. The TV will now search all available channels with
an on-screen progress percentage displayed. Any tuning Mode that includes Digital channels will
require several minutes to complete auto programming.
This may take 20 or more minutes. If screen shuts off, Press the POWER button to turn monitor
on.
12.
Press the SETUP button to return to normal TV viewing once auto programming is complete.
13.
Press the CHANNEL LIST button to list programmed channels.
14.
Press the SETUP button to return to SETUP MODE menu.
Auto Program (DVB-T Monitor)
1.
Tap to select Auto Program.
2.
Tap to enter the menu.
Page 48 of 199
Cybex 525T Treadmill Part Number
To Next Page
Loading...
