Error 96: Thermal Integrator of output current
Cause:
The drive has several over-current situations that can cause this:
• >200% Rated for 3 seconds (roughly 16A)
• >150% Rated for 1 minute (roughly 12A)
• >101% Rated for accumulated time (roughly =>8.1A)
Service:
• Check drive’s cooling fan and heat sink for clogs.
• Verify line voltage isn’t sagging.
• Check the belt/deck for wear.
• Check treadmill for physical obstructions, seized bearings, etc.
• Investigate actual line current with various weight users. Determine user weight, speed and incline
when error occurred.
Page 89 of 199
Cybex 525T Treadmill Part Number
To Next Page
Loading...
Need help?
General
