Error 105: Thermal Integrator of Input Current (Drives with PFC only)
Cause:
The drive is measuring the heating effect of high input current.
• 110 VAC: >=23A starts the timer, 43A / 18 seconds based on I ²C
• 220 VAC: >=12.5A starts the timer, 25A / 18 seconds based on I²C
Service:
• Verify line voltage isn’t sagging.
• Check the belt/deck for wear.
• Check treadmill for physical obstructions, seized bearings, etc.
• Investigate actual line current with various weight users. Determine user weight, speed and incline
when error occurred.
Page 93 of 199
Cybex 525T Treadmill Part Number
To Next Page
Loading...
Need help?
General
