57
Cybex Owner’s Manual
6. Vacuum the fan and heat sink area of the motor controller.
1
2
1 Motor controller
2 Fan and heatsink
7. Use a dry cloth for the areas that you can not reach with the vacuum cleaner. If the machine
has not been used for some time or is excessively dirty, use a dry cloth to wipe all exposed
areas.
8. Raise the rear of the treadmill and roll it back from its present position to vacuum the oor area
underneath the unit. When nished, return the treadmill to its normal position.
Install shield
Tighten the seven screws securing the shield to the base using a Philips screwdriver.
2
3
1
Description
1 Base
2 Screws (7)
3 Shield
Install motor cover
1. Place motor cover on carpeting or other soft surface. Do not scratch top of hood cover.
2. Insert the four plastic connectors into the motor cover.
1
2
Description
1 Plastic connectors (4)
2 Motor cover
To Next Page
Loading...
Need help?
General
