Cybex 750T Treadmill Service Manual
Preventive
Maintenance
Page 2-7
Displays the count-down to the next required service in miles remaining. Also allows for resetting this
odometer of a service has been performed.
Displayed as “SERVICE IN XXXXX MI (or KM)” where XXXXX is the distance until the next scheduled
maintenance. The odometer is set to 15,000 miles (24,140 Km). The Odometer counts down from
15,000 (24,140 Km) miles to 0 before displaying the Service message. Press and hold the CLEAR key
for three seconds while displaying the service odometer will reset it to 15,000 miles (24,140 Km).
Statistics
The Statistics screen allows tracking of equipment usage.
Open Statistics screen from Dormant Mode
Press Clear
Key 9-9-9
Press ENTER
Data features can also be accessed from the CSAFE port.
Use the ENTER key to advance to next screen.
Use the Load Control Keys to scroll forward or backward in the menu.
Statistics Menu Display
ST1 – ODOMETER MI XXXX.X or
KM XXXX.X
0.0 – 999,999.9 Miles/Km = total miles accumulated and
units are either Miles or Km, depending on the setup.
ST2 – HOURS HOURS 0 – 99999 = total time in hours for running belt
movement.
ST3 – STARTS STARTS XXXXXX 0 – 999999 = number of running belt starts
ST4 – MOVES MOVES XXXXXXX 0 – 9,999,999 = Number of incline moves in 1%
increments.
ST5 – ERRORS [Log #] [ERR #]
HH:MM M-DD-YY
Tracks error codes in a rolling log of 20 entries, each
stamped with time and date
ST6 – SERVICE SVC IN XXXXX MI
(or KM)”
The distance until the next scheduled maintenance. This
counts down from 15,000 miles
ST7 – PGM USAGE PR Y XXXXXX Y= program number
XXXXX = number of times each program has been
started
WARNING: All maintenance activities shall be performed by qualified personnel. Failure
to do so could result in serious injury.
NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your
treadmill. Instruct all personnel in equipment inspection and maintenance actions and also in
accident reporting/recording. Contact Cybex Customer Service at 888-462-9239 or
508-533-4300 for any preventive maintenance or service concerns.
To Next Page
Loading...
Need help?
General
