CYBEX 770T - Page 140

Install running deck
1. Place the deck in the correct position on the frame.
Qty.DescriptionItem
87/16” Bolts1
8Flat washer2
1Running deck3
1Running belt4
2. Install and tighten the eight screws and eight flat washers that hold the deck in place using a 7/16”
Socket wrench.
Install front roller
1. Slide the front roller into the running belt.
2. Slide the drive belt around the front roller before attaching the front roller.
Qty.DescriptionItem
1Front roller1
1Drive belt2
1Mounting bolt3
1Tensioning slot4
Page 140 of 261
Cybex 770T/790T Treadmill Part Number