Remove power inlet
Take notice of which cables are connected to the power inlet.
1. Disconnect the three fast-on connectors that connect to the power inlet.
Qty.DescriptionItem
1Power Inlet1
1To Ground Stud (Green)2
1To On/Off Switch (White)3
1To On/Off Switch (Black)4
2. Press in the sides of the power inlet to remove it from the mounting plate using a flat head screwdriver.
Qty.DescriptionItem
1Mounting Plate1
1Power Inlet2
Page 186 of 261
Cybex 770T/790T Treadmill Part Number
To Next Page
Loading...
