CYBEX 770T - Page 209

Install fan
1. Install six screws securing fan and duct to console assembly using a Phillips screwdriver.
The louver is held in place with the duct.
Qty.DescriptionItem
1Console Assembly1
1Louver2
1Duct3
6Screw4
1Fan5
2. Plug fan cable into connector (J19) on MCC board.
Qty.DescriptionItem
1Fan Cable1
1MCC Board2
1J193
1Fan4
Install back cover
Install the four screws securing the back cover to the console assembly using a Phillips screwdriver.
Page 209 of 261
Cybex 770T/790T Treadmill Part Number