CYBEX 770T - Page 228

2. Place CardioTouch screen in place in handset.
Qty.DescriptionItem
1Handset1
7Screw2
1Ground cable3
1CardioTouch screen4
1Membrane cable5
3. Install ground cable with a screw in location shown and tighten by hand.
4. Install remaining six screws by hand.
5. Tighten seven screws, with minimal force, in order shown. The production torque settings are 4
in-lbs (0.45 Nm).
6. Install four screws and two support brackets to handset using a Phillips screwdriver.
Qty.DescriptionItem
4Screw1
2Support bracket2
1Handset3
Page 228 of 261
Cybex 770T/790T Treadmill Part Number