MYE Coax with STB FAR from equipment (up to 1000’ range if unobstructed)
BV CAB or Connected TV STB
This system uses a transmitter mounted inside the console and a 14” lead that plugs in the Gray MYE
port of the MCC. It uses our internal Cat5 cable to connect out to an infrared transmitter which plugs in
to the ethernet port at the base of our equipment. This allows for a NEAR STB, where the box is located
near the equipment, or FAR, where the STB is stored in an A/V closet. If FAR, the facility must run
ethernet from our equipment to the A/V closet and connect the Infrared transmitter from there to the
STB.
BVE CAB or Connected TV Coax with STB NEAR Equipment
BVE CAB or Connected TV Coax with STB FAR from equipment
Page 46 of 261
Cybex 770T/790T Treadmill Part Number
To Next Page
Loading...
