2. Tap the Treadmill Totals icon to display the Total Unit Stats menu.
Total Units Stats menu:
Distance – Recorded total distance in the configured units.
Hours – Number of total time the motor has been run, stored in hours.
Treadmill Totals
Starts – Number of times the motor has been started.
Moves – Number of single % grade moves, up or down, of the incline motor.
On Time – How long the console has been powered on
Days in Service – Today’s date minus the Install Date.
Install Icon – This icon is not active but shows the install date in the text window.
Distance – Recorded total distance in the configured units.
Days in Service – This is for the running belt and running deck pair recent install
date.
Belt
100 Avg Amps – A rolling average of the last 100 user’s line current.
100 Peak Amps – Peak current of the last 100 users.
Estimated Distance Remaining – A calculated value.
Estimated Change Date – Based on age, miles, and average current.
Install Icon – This icon is active to allow resetting the install date for the running
belt.
Distance – Recorded total distance in the configured units.
Days in Service – This is for the running belt and running deck pair recent install
date.
Deck
100 Avg Amps – A rolling average of the last 100 user’s line current.
100 Peak Amps – Peak current of the last 100 users.
Estimated Distance Remaining – A calculated value.
Estimated Change Date – Based on age, miles, and average current.
Install Icon – This icon is active to allow resetting the install date for the running
deck.
Page 69 of 261
Cybex 770T/790T Treadmill Part Number
To Next Page
Loading...
