CYBEX 770T User Manual

3. Tap ▲ or ▼ to select Mode.
Mode
Channel Sequence
Additional Digital Signal
Channel Map
Figure 1: ATSC Monitor
4. Tap ◄ or ► to set the scope of channel scanning.
DescriptionOption
TV searches for analog channels onlyAnalog Only
(Default)
TV searches for digital channels onlyDigital Only
TV searches for both analog and digital channelsAnalog and
Digital
5. Tap ▼ to select Channel Sequence.
6. Tap ◄ or ► to set the Channel Sequence in which the channels are displayed after searching.
DescriptionOption
In the order of channel number regardless of the system.Interleave A+D
Digital channels are displayed after all analog channels.All A then D
7. Tap ▲ or ▼ to select Additional Digital Signal. Not available when Mode is set to Analog Only.
8. Tap ◄ or ► to choose the Additional Digital Signal source.
• None
• Air
• Cable STD
• Cable IRC
• Cable HRC
9. Tap ▼ to select Channel Map.
10. Tap ► to start auto programming. A confirmation menu will appear before proceeding.
Page 43 of 105
Cybex Treadmill Product Number 770T Part Number LT-22983-4 M

CYBEX 770T Specifications

General

Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0 - 15%
Running Surface	22" x 60"
Heart Rate Monitoring	Yes
Display	15" Touch Screen