6.
Tap the Setup icon to return to the previous menu.
To exit, Tap the Setup icon until the programming menus disappear. If there are more analog
channels to be added or deleted, repeat steps 3 through 5.
7. Tap ▲ or ▼ to highlight Enable/Disable Digital Channel.
8. Tap ► to access Enable/Disable Digital Channel. If there are not any channels programmed in
the Service Level, No Channels Present will appear in the menu.
9. Tap ▲ or ▼ to highlight the digital channel that needs to be enabled or disabled.
10. Tap ◄ or ► to select Enable or Disable.
11.
Tap the Setup icon to return to the previous menu.
Features
1. Tap ▲ or ▼ to select Features.
2. Tap ► to access Features menu.
DVB-T MonitorATSC Monitor
3. Tap ▲ or ▼ to select settings.
Page 47 of 105
Cybex Treadmill Product Number 770T Part Number LT-22983-4 M
To Next Page
Loading...
