30
HOW TO CHANGE BATTERY
Consider the following points for changing the battery:
To change the battery you have to open the compartment
located at rear of the load leg with a screw driver.
After changing the battery it is mandatory to close this
compartment again and the characeristic warning signal is
audible if the load leg isn‘t installed correctly.
• Keep all batteries out of reach of children.
• Only use the recommended type CR2032 batteries.
• An empty battery always has to be removed in order to
protect the product from escaping liquids.
• Never expose this product or the battery to fire.
• Do not use old batteries or batteries that show signs of
leakage or cracks.
• Use only high-quality new batteries.
• Pay attention to the correct polarity (+/-).
To Next Page
Loading...
