62
REMOVING THE NEWBORN INLAY
The preinstalled newborn inlay helps to support lying
comfort and fit for the smallest babies.
The newborn inlay may be removed after the baby is 61 cm
(approx. 3 months) to provide more space for the child.
To remove the newborn inlay open the snap buttons of the
headrest cover. Now first pull off the headrest cover and then
remove the newborn insert. After that put the headrest cover
back in place, reposition the shoulder belts and finally close
the snap buttons again.
Before washing the newborn inlay, please remove the foam in
the newborn inlay via dedicated slots. You can put the foam
back through the slot after the newborn inlay is washed and
dried.
To Next Page
Loading...
Need help?
General
