38
NOTE! Only when the car seat is in most upright position and
the indicator (13) shows RED, the car seat can be rotated. The
seat can only be rotated forward-facing when the forward facing
use has been released by moving the switch in the backrest.
NOTE! Before starting your journey you must return the seat
shell to a basic position, locked in place.
ROTATION FUNCTION OF BASE Z
The car seat can be rotated 360°, in order to help to put your
child into and take your child out of the vehicle. This also
allows you to change the position of the seat from rearward-
facing to forward-facing. The rotation function is connected to
the position of the headrest.
• Rotate the seat shell back to its original position. As soon
as the neutral position is reached, the seat must be locked
at least into the first sitting position. This can be noticed by
an audible “CLICK”.
• Next control if the indicator (13) on the Base is GREEN.
If the indicator shows RED, the seat is not locked well.
Repeat the process if necessary.
In order to be able to rotate the seat shell into boarding
position, please proceed as follows:
• Pull the position adjustment handle (18) and while keeping
the handle pulled, bring the seat shell into a completely
upright position.
• Now you can rotate the seat shell towards the door
and strap the child in without difficulty. See chapter
“SECURING BY MEANS OF HARNESS SYSTEM”.
13
18
!
WARNING! Use of the seat in forward-facing position
is permitted when the child is older than 15 months and
min. 76 cm tall.
To Next Page
Loading...
Need help?
General
