34
INSTALLING THE CAR SEAT ON THE BASE
NOTE! Make sure that the surface of the base is clear of free
objects.
NOTE! Before installing the seat take care that the base is
turned in the authorized position for driving (see chapter:
„ROTATION FUNCTION“). The driving direction incdicator
(13) needs to show GREEN.
Place the car seat on the base. Please ensure that both
locking bars (11) lock with an audible „CLICK“. Check
whether the base indicator (12) on the base is GREEN. If the
indicator is not GREEN, the car seat is not sufficiently locked.
If necessary, repeat the procedure.
Activate the side protector (14) (see chapter „ADJUSTING
THE SIDE PROTECTORS“).
11
14
12
13
To Next Page
Loading...
