50
11
14
12
INSTALLING THE INFANT CAR SEAT ON THE BASE Z ONE
Make sure that the carrying handle is fixed in carrying position
A, the child is secured with the integrated harness system
as well as ensure the correct installation of the base in the
vehicle. Place the car seat in rearward facing position on the
base. Please ensure that both locking bars (11) lock with
an audible „CLICK“. Check whether the base indicator (12)
on the base is GREEN. If the indicator is not GREEN, the
car seat is not sufficiently locked. If necessary, repeat the
procedure.
NOTE! Make sure that the surface of the base is clear of free
objects.
Activate the side protector (14) (see chapter „ADJUSTING
THE SIDE PROTECTORS“).
To Next Page
Loading...
Need help?
General
