74
28
23
REMOVING THE COVER
Removal
The cover consists of 6 components fastened to the seat
shell by elastic pipings, snap buttons and zipper. Once you
have released all the fastenings, you can remove the individual
components for washing.
NOTE!
When remounting the shoulder pads, it is essential to
ensure that ...
NOTE!
Before detaching the cover please pull out the elastics
under silver decorative parts to avoid damage.
Proceed as follows:
• Open the belt buckle (23) of the 5-point harness system.
• Open all snap buttons of the pads and cover parts (27).
• Unhook the shoulder pads from the brackets (28).
• Remove all belt pads.
• Thread the shoulder belts out of the cover.
• Remove the cover by pulling it forwards.
• To fix the cover again on the seat carry out the steps in
reverse order.
• the closed side faces towards the childs neck.
• the shoulder pads are perfectly mounted on the brackets (28).
• the shoulder belts are guided inside the shoulder pads.
27
To Next Page
Loading...
Need help?
General
