EasyManuals Logo

CYBEX PLATINUM User Manual

CYBEX PLATINUM
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40
NOTE! We suggest to kindly deactivate the L.S.P. before
rotating the seat. For details see chapter „ADJUSTING THE
SIDE PROTECTORS“.
NOTE! Avoid getting any dirt or sand in between the upper
seat shell and the base. This can have a negative impact on
the performance of the rotation and recline function. Should
this happen the dirt should be removed before rotating and
reclining the seat any further to avoid any permanent damage
of the seat.
!
WARNING! While travelling the car seat must always
be locked in the rearward-facing or forward-facing posi-
tion. Never use the seat in the loading position or in any
unlocked intermediate position while travelling.
NOTE! Make sure that the seat shell is correctly locked into
place by trying to rotate it, without pressing the adjustment
handle (18).
In order to be able to rotate the seat shell into forward-facing
position, please proceed as follows:
Move the headrest cover up and the backrest cover down
and move switch on the backrest. It now shows: 15M+,
≥76 cm.
Now pull the position adjustment handle (18) and while
keeping the handle pulled, bring the seat shell into a
completely upright position.
Now you can rotate the seat shell forward-facing.
15M+
≥76cm
18

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX PLATINUM and is the answer not in the manual?

CYBEX PLATINUM Specifications

General IconGeneral
Harness Type5-point harness
CategoryCar Seat
Height RangeUp to 49 inches
InstallationLATCH system or seat belt
Safety FeaturesSide-impact protection

Related product manuals