CYBEX PLATINUM User Manual

52
26a
25a
Press the green release button (25a) and pull the upper
release button (26a) up to unlock the infant car seat from the
base. Tilt the seat a little. The base indicator now shows RED.
Now you can release the unlocking buttons (25a) and (26a)
and lift the infant car seat off the Base.
NOTE! To prevent damage to your car and the car seat, the
side protector should be folded back before removing the car
seat (see chapter „ADJUSTING THE SIDE PROTECTORS“).
REMOVAL

CYBEX PLATINUM Specifications

General

Harness Type	5-point harness
Category	Car Seat
Height Range	Up to 49 inches
Installation	LATCH system or seat belt
Safety Features	Side-impact protection