EasyManuals Logo

CYBEX PLATINUM User Manual

CYBEX PLATINUM
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
68
NOTE! For the car seat to offer optimum protection, shoulder
belts should fit the body as closely as possible (21) and the
hip belts should should run as low as possible so they are
thight against the pelvis.
NOTE! Ensure that shoulder belts (21) are not twisted.
Put your child into the car seat.
Place shoulder belts (21) directly over your child’s
shoulders.
Place both buckle tongues (24) together and lock them in
place in belt buckle (23) with an audible “CLICK”.
Fasten the clip with an audible „CLICK“.
Push the closed clip down toward belt buckle.
Pull cautiously on central adjustment belt (25) in order to
tighten shoulder belts (21) until they fit your child’s body.
Position the Clip right under the shoulder pads.
23
25
24
26
Undo the belt buckle (23) by pressing the red button firmly.
Open the clip by pressing the release button and pulling
both parts apart.
The belt tongues (24) can now be fixed sideward on the
cover (26). This area is magnetic.
21

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX PLATINUM and is the answer not in the manual?

CYBEX PLATINUM Specifications

General IconGeneral
Harness Type5-point harness
CategoryCar Seat
Height RangeUp to 49 inches
InstallationLATCH system or seat belt
Safety FeaturesSide-impact protection

Related product manuals