Maintenance
Page 6-4
3. Some machines, such as the Fly, Hip Adduction and Hip Abduction, use cables in addition
to belts. Inspect all cables for wear or damage and proper tension. When inspecting
cables, run your fingers on the cable, paying particular attention to bends in the cable and
attachment points.
Replace all worn cables immediately. The following conditions may indicate a worn
cable:
• A tear or crack in the cable sheath that exposes the cable. See Figure 1
• A kink in the cable. See Figure 2.
• A curled sheath. See Figure 3.
• “Necking”, a stretched cable sheath. See Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4
Cybex VR2 Owner’s Manual
To Next Page
Loading...
