Hardware
• All 3/8" socket head cap screws shall be of grade 8 (or equivalent). All bolts shall be either
chromed or zinc plated for additional corrosion resistance.
Weight Stack Guards
• All weight stacks shall be guarded on the backside to prevent bystanders from inadvertent
contact with the weight stack during use.
Cushion/Upholstery
• A superior grade of Naugahyde from Gencorp (or equivalent) shall be used on all pad
covers and wear covers.
• The color shall be sulfide stain resistant.
• All edges shall be stitched to eliminate any folds in the material that would limit durability.
• Cushions come with replaceable slipcovers on all high use areas, reducing maintenance
expense by not having to replace the entire cushion.
• Cushion foam consists of a combination of high and medium density closed-cell Omalon
polyurethane, for durability and comfort.
Adjustments
• Recessed high contrast Lexan decal for all seat and pad adjustments for maximum
readability.
Instructional Placard
• Shall provide step-by-step instructions and a picture to illustrate use, visible from the
exercise position.
• Placard shall indicate proper positioning, details muscles trained and clearly describe the
correct use of machines.
Equipment Anchoring
• Each machine shall be equipped with a provision for anchoring it to the floor.
Cybex VR2 Owner’s Manual
Technical
Specifications
Page 1-3
To Next Page
Loading...
