Maintenance
Page 6-5
1. Replace all belts and cables at least annually.
Yearly Procedures
Cybex VR2 Owner’s Manual
4. Inspect bars and handles for wear, paying particular attention to tab area connecting
points.
Replace all worn handles immediately.
5. Inspect snap links for proper latching (indicates wear).
Replace all worn snap links immediately.
6. Inspect all labeling for readability. This includes instructional placards, warning and
caution decals.
Replace all worn labeling immediately.
7. Inspect all weight stacks for proper alignment and operation.
Correct all improper alignment and operation issues immediately.
8. Wipe Weight Stack Guide Rods clean over entire length. Lubricate with a light coat of
medium weight automotive engine oil.
1. Inspect grips and replace as necessary.
“As Required” Procedures
To Next Page
Loading...
