CycleOps Joule 3.0 - Page 62

Joule 3.0 User Guide page 62
Chapter 7: Setting Up CycleOps Joule 3.0 ™
Setting Up Display...continued
18. Press [JOYSTICK] up/down to highlight Speed With Zeros. Press [JOYSTICK] in and release to select Speed
With Zeros.
19. Press [JOYSTICK] up/down to change Speed With Zeros from Yes to No. Press [JOYSTICK] in and release to
save settings. Note: Speed With Zeros set to Yes will calculate all average speed data with zeros included, Speed
With Zeros set to No will calculate all average speed data without zeros. Press [JOYSTICK] in and release to save
changes.
20. Press [JOYSTICK] up/down to highlight Language. Press [JOYSTICK] in and release to select Language.
21. Press [JOYSTICK] up/down to change Language. Press [JOYSTICK] in and release to save changes.
22. Press [JOYSTICK] up/down to highlight Units. Press [JOYSTICK] in and release to select Units. Press [JOY-
STICK] in and release to save changes.
23. Press [JOYSTICK] up/down to change Units. Press [JOYSTICK] in and release to select between English and
Metric. Press [JOYSTICK] in and release to save changes.
Back
light
Le
vel:
>
2
Back
light
T
ime (sec):
Co
ntrast:
5
>
Ze
ro averaging:
>
W
ith
>
Po
wer
Av
g (sec):
>
1
>
Cadence
Av
g (sec):
>
>
1
Speed
Av
g (sec):
>
1
>
Language:
>
English
>
Units:
>
English
>
P
air New Sensor
>
Menu
IN
T
Displa
Displa
y
y
10
10
Back
<