EN / CZone® DDS User & Installation Manual
IDENTIFICATION LABELS
Important information for service or maintenance can be found on the identification labels.
3 OVERVIEW
DESCRIPTION
The DDS module uses a combination of MOSFET switching technology and relay output channels to achieve a desirably
small footprint. The CZone DDS has advanced bilge pump functionality on all relay output channels, allowing bilge pump
control and external (automatic) voltage detection from a single wire.
FEATURES
• 12 or 24V system voltage (60A max)
• NMEA2000 interface
• 12 Relay channels
• 5 MOSFET channels with Over-Current Protection
• 3 Analog Inputs (Voltage or Resistance)
• 5 Positive/Negative Digital Outputs and Inputs
• 5 Positive Digital Outputs and Inputs
• Advanced bilge pump functionality on all relay output channels
• Automotive mini fuses (ATM fuses)
• 12 True bypass fuse position for relays
• Compliance – Ignition Protected, CE, RCM, FCC, UK-CA
CAUTION – Never remove the
identification labels, this will void
the warranty.
Serial Number. Label located on
top of the DDS unit.
Part Number. Label located on the
front of the DDS unit.
To Next Page
Loading...
