D-Link AC750 - System

98D-Link DIR-818LW User Manual
Section 3 - Conguration
Click the Save Conguration button to save the current
router conguration settings to a le on the hard disk
of the computer you are using. A le dialog will appear,
allowing you to select a location and le name for the
saved settings.
Use this option to load previously saved router
conguration settings. First, click on Browse to nd a
previously saved le of conguration settings. Then, click
the Restore Conguration from File button to transfer
those settings to the router.
This option will restore all conguration settings back
to the settings that were in eect at the time the router
was shipped from the factory. Any settings that have
not been saved will be lost, including any rules that
you have created. If you want to save the current router
conguration settings rst, use the Save Conguration
button above.
Click Reboot the Device to reboot the router.
Click Clear to remove any installed Language Packs.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Clear Language
Pack:
System
This section allows you to manage the router’s conguration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.