D-Link AC750 - Autoconfiguration

64D-Link DIR-818LW User Manual
Section 3 - Conguration
Autoconguration
Select Autoconguration (SLAAC/DHCPv6) from the drop-
down menu.
Select either Obtain DNS server address automatically or
Use the following IPv6 DNS servers.
Enter the primary and secondary DNS server addresses.
Check this box to enable DHCP prex delegation.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN IPv6 Link-Local Address.
Check to enable the Autoconguration feature.
Check to enable prex delegation for routers in your LAN.
Select SLAAC + RDNSS or SLAAC + Stateless DHCP, or
Stateful DHCPv6.
Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the Router Advertisement Lifetime (in minutes).
Click Save Settings.
My IPv6 Connection is:
IPv6 DNS Settings:
Primary/Secondary IPv6
DNS Server:
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable automatic IPv6
address assignment:
Enable Automatic
DHCP-PD in LAN:
Autoconguration Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
Router Advertisement
Lifetime: