D-Link AC750 - L2 Tp

29D-Link DIR-818LW User Manual
Section 3 - Conguration
Select L2TP (Username/Password) from the drop-down menu.
In most cases, select Dynamic IP. Select Static IP if your ISP assigned
you the IP address, subnet mask, gateway, and DNS server addresses.
Enter the L2TP IP Address supplied by your ISP (Static only).
Enter the Subnet Mask supplied by your ISP (Static only).
Enter the Gateway IP Address provided by your ISP (Static only).
Enter the Server IP Address provided by your ISP (optional).
Enter your L2TP Username.
Enter your L2TP Password and then retype the password in the
next box.
Select either Always-on, On-Demand, or Manual.
Enter a Maximum Idle Time during which the Internet connection is maintained during inactivity. To disable this feature,
enable Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
My Internet
Connection is:
Address Mode:
L2TP IP Address:
L2TP Subnet
Mask:
L2TP Gateway IP
Address:
L2TP Server IP
Address:
Username:
Password:
Reconnect Mode:
Maximum Idle
Time:
DNS Servers:
Internet Setup
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP (Internet Service Provider) uses a L2TP connection. Your ISP will provide you with a username
and password.