D-Link AC750 - Status; Device Info

104D-Link DIR-818LW User Manual
Section 3 - Conguration
This screen displays the current information for the DIR-818LW. It includes the LAN, WAN (Internet), and Wireless information. If
your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use
Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a
Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect
to establish the PPPoE connection.
Displays the router’s Time, Firmware Version, and mydlink registration status.
Displays the Connection Type, Cable Status, Network Status, MAC Address, and the
public IP settings.
Displays the MAC Address and the private (local) IP settings for the router.
Displays the 2.4GHz wireless MAC Address and your wireless settings such as Channel
and Network Name (SSID).
Displays the 5GHz wireless MAC Address and your wireless settings such as Channel
and Network Name (SSID).
Displays computers and devices that are connected to the router via Ethernet and
that are receiving an IP address assigned by the router (DHCP).
Displays IPv4 and IPv6 Multicast Group Addresses.
General:
WAN:
LAN:
Wireless LAN:
Wireless LAN2:
LAN Computers:
IGMP Multicast
Memberships:
Device Info
Status