D-Link AC750 - Ipv6 Routing

93D-Link DIR-818LW User Manual
Section 3 - Conguration
IPv6 Routing
Check the box to the left of the Name of the route you wish
to enable.
Enter a specic Name to identify this route.
Enter the IP address of the router used to reach the specied
destination, or enter the IPv6 address prex length of the
packets that will take this route.
Enter the Metric value for this rule here.
Use the drop-down menu to specify if the IP packet must use
the WAN or LAN interface to transit out of the Router.
Enter the next hop that will be taken if this route is used.
Click Save Settings.
Route List:
Name:
Destination IPv6/
Prex Length:
Metric:
Interface:
Gateway:
This screen allows you to specify custom routes that determine how data is moved around your network.