87D-Link DIR-818LW User Manual
Section 3 - Conguration
Advanced Wireless
Displays the 2.4GHz Band (top) or 5GHz Band (bottom).
From the drop-down menu, select the transmit power
for each of the antennas as High, Medium, or Low.
This enables 802.11d operation. 802.11d is a wireless
specification developed to allow implementation of
wireless networks in countries that cannot use the 802.11
standard. This feature should only be enabled if you are
in a country that requires it.
WMM is QoS for your wireless network. Check to
Enable. This will improve the quality of video and voice
applications for your wireless clients.
For the 2.4GHz band, you can Enable this option to reduce
interference from other wireless networks in your area.
If the channel width is operating at 40MHz and there
is another wireless network’s channel over-lapping and
causing interference, the router will automatically change
to 20MHz.
Click Save Settings.
Wireless Band:
Transmit Power:
WLAN Partition:
WMM Enable:
HT 20/40
Coexistence:
The Advanced Wireless options are for users that want to deviate from the standard settings. Adjusting these values may limit
the performance of your wireless network.
To Next Page
Loading...
