DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
In the opened window, you can specify the following parameters:
Parameter Description
Enable rule
Move the switch to the right to enable the rule.
Move the switch to the left to disable the rule.
Action
Select an action for the rule.
Deny: Blocks access to the extender or the upper router's network
for the device with the specified MAC address if the default mode
allows access for all devices.
Allow: Allows access to the extender or the upper router's network
for the device with the specified MAC address if the default mode
denies access for all devices.
MAC address
The MAC address of a device connected to the extender.
Hostname
The name of the device for easier identification. You can specify
any name.
After specifying the needed parameters, click the SAVE button.
To edit a rule, select the relevant line in the table. In the opened window, change the needed
parameters and click the SAVE button.
To remove a rule, select the checkbox located to the left of the relevant line of the table and click
the DELETE button. Also you can remove a rule in the editing window.
Page 72 of 91
To Next Page
Loading...
Need help?
General
Weight and Dimensions
