EasyManuals Logo

D-Link DAP-1610 User Manual

D-Link DAP-1610
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
Figure 60. The System / Log page. The Settings tab.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter Description
Type
Select a type of logging from the drop-down list.
Local: the system log is stored in the extender's memory.
When this value is selected, the Server and Port fields are
not displayed.
Remote: the system log is sent to the remote host specified in
the Server field.
Local and remote: the system log is stored in the extender's
memory and sent to the remote host specified in the Server
field.
Level
Select a type of messages and alerts/notifications to be logged.
Server
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Port
A port of the host specified in the Server field. By default, the value
514 is specified.
After specifying the needed parameters, click the APPLY button.
Page 79 of 91

Other manuals for D-Link DAP-1610

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DAP-1610 and is the answer not in the manual?

D-Link DAP-1610 Specifications

General IconGeneral
TypeNetwork transmitter & receiver
WPS push buttonYes
Ethernet LAN data rates10, 100 Mbit/s
Maximum transfer distance- m
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithmsWPA, WPA2
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ab
CertificationFCC, IC, CE2. UL
Product colorWhite
LED indicatorsSignal strength, Status, WPS
Ethernet LAN (RJ-45) ports1
Antenna typeExternal
Antennas quantity2
AC input voltage110-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth50.7 mm
Width97.9 mm
Height48.7 mm
Weight120 g

Related product manuals