DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
System Time
On the System / System Time page, you can manually set the time and date of the extender or
configure automatic synchronization of the system time with a time server on the Internet.
Figure 67. The System / System Time page.
To set the system time manually, follow the next steps:
1. Move the Enable NTP switch to the left.
2. In the Time Settings section, specify needed values. To specify the time set up your PC or
portable device, click the SET LOCAL TIME button.
3. Click the APPLY button. The System date and System time fields will be filled in
automatically.
To enable automatic synchronization with a time server, follow the next steps:
1. Move the Enable NTP switch to the right.
2. Specify the needed NTP server or leave the value specified by default in the NTP Servers
section. If you need to specify several servers, click the ADD SERVER button.
3. Select your time zone from the Timezone drop-down list in the NTP Settings section. To
set the time zone in accordance with the settings of your operating system or portable
device, click the DETERMINE TIMEZONE button.
4. Click the APPLY button. The System date and System time fields will be filled in
automatically.
To enable automatic adjustment for daylight saving time of the extender, move the Daylight
saving time switch to the right in the NTP Servers section and click the APPLY button.
Page 86 of 91
To Next Page
Loading...
Need help?
General
Weight and Dimensions
