D-Link DAP-1610 User Manual

DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
Abbreviations and Acronyms
PPTP Point-to-point tunneling protocol
PSK
Pre-shared key
QoS Quality of Service
RADIUS
Remote Authentication in Dial-In User Service
RIP Routing Information Protocol
RTS
Request To Send
RTSP Real Time Streaming Protocol
SIP
Session Initiation Protocol
SSID Service Set Identifier
TKIP
Temporal Key Integrity Protocol
UDP User Datagram Protocol
UPnP
Universal Plug and Play
URL Uniform Resource Locator
VLAN
Virtual Local Area Network
VPN Virtual Private Network
WAN
Wide Area Network
WEP Wired Equivalent Privacy
Wi-Fi
Wireless Fidelity
WLAN Wireless Local Area Network
WMM
Wi-Fi Multimedia
WPA Wi-Fi Protected Access
WPS
Wi-Fi Protected Setup
Page 91 of 91

D-Link DAP-1610 Specifications

General

Type	Network transmitter & receiver
WPS push button	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Security algorithms	WPA, WPA2
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ab
Certification	FCC, IC, CE2. UL
Product color	White
LED indicators	Signal strength, Status, WPS
Ethernet LAN (RJ-45) ports	1
Antenna type	External
Antennas quantity	2
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	50.7 mm
Width	97.9 mm
Height	48.7 mm
Weight	120 g