D-Link DAP-2695 - Page 14

802.11 b/g /n Access Point Command Line Interface Manual
14
set mcastrate_dualband
Set mcast rate
set mcastrate_dualband
set wlan_utilization
Set wlan utilization
set wlan_utilization
set uapsd
Set UAPSD
set uapsd
set d-wepkeylen
Set 802.1X dynamic WEP Key Length
set d-wepkeylen
set d-wepkeyupdate
Set 802.1X dynamic WEP Rekey Interval(in Secs)
set d-wepkeyupdate
set apcscan
Set wireless client site survey
set apcscan
Security
Del Command:
Function
Syntax
del key
Delete Encryption key (index:1--4)
del key [1-4]
Get Command:
Function
Syntax
get authentication
Display Authentication Type
get authentication
get cipher
Display Encryption cipher type
get cipher
get key
Display Encryption Key (index:1--4)
get key [1--4]
get keyentrymethod
Display Encryption Key Entry Method [index:1--4]
get keyentrymethod [1--4]
get keylength
Display Encryption Key Length (in Bits)[index:1--4]
get keylength [1--4]
get defkeyindex
Display Default Key Index
get defkeyindex
get groupkeyupdate
Display Group Key Update Interval (in Secs)
get groupkeyupdate
get autorekey
Display autorekey
get autorekey
get autorekey_smtp
Display autorekey smtp state
get autorekey_smtp
get rogue_ap
Display Rogue AP List
get rogue_ap
Set Command:
Function
Syntax
set authentication
Set Authentication Type
set authentication
set cipher
Set Cipher of wep,tkip,aes, or auto
set cipher
set key
Set Encryption Key Index [1--4][value]
set key [1--4][value]
set keyentrymethod
Select Encryption Key Entry Method of key [index 1--4]
set keyentrymethod [1--4]
set keylength
Set Encryption Key Length of key Index [1--4]
set keylength [1--4]
set defkeyindex
Set Default Key Index [1--4]
set defkeyindex [1--4]