D-Link DAP-300P - Page 7

DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Overview
Software
Network functions
· Support of IEEE 802.1X for Internet connection
· DHCP server/relay
· Advanced configuration of built-in DHCP server
· Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation
· Automatic obtainment of LAN IP address (for access point/repeater/client
modes)
· DNS relay
· Dynamic DNS
· Static IPv4/IPv6 routing
· IGMP Proxy
· RIP
· Support of UPnP IGD
· Support of VLAN
· WAN ping respond
· Support of SIP ALG
· Support of RTSP
· WAN failover
· Autonegotiation of speed, duplex mode, and flow control / Manual speed and
duplex mode setup for each Ethernet port
· Built-in UDPXY application
Firewall functions
· Network Address Translation (NAT)
· Stateful Packet Inspection (SPI)
· IPv4/IPv6 filter
· MAC filter
· URL filter
· DMZ
· Prevention of ARP and DDoS attacks
· Virtual servers
· Built-in Yandex.DNS web content filtering service
VPN
· IPsec/PPTP/L2TP/PPPoE pass-through
Management and monitoring
· Local and remote access to settings through TELNET/WEB (HTTP/HTTPS)
· Bilingual web-based interface for configuration and management
(Russian/English)
· Notification on connection problems and auto redirect to settings
· Firmware update via web-based interface
· Automatic notification on new firmware version
· Saving/restoring configuration to/from file
· Support of logging to remote host
· Automatic synchronization of system time with NTP server and manual
time/date setup
· Ping utility
· Traceroute utility
· TR-069 client
· SNMP agent (SNMPv2/v3)
Wireless Module Parameters
Standards
· IEEE 802.11b/g/n
Frequency range
The frequency range depends upon the
radio frequency regulations applied in your
country
· 2400 ~ 2483.5MHz
Page 7 of 175