D-Link DAP-300P - Page 8

DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Overview
Wireless Module Parameters
Wireless connection security
· WEP
· WPA/WPA2 (Personal/Enterprise)
· МАС filter
· WPS (PBC/PIN)
Advanced functions
· “Client” function (access point mode)
Wireless network client
Wireless network repeater
· “Client” function (router mode)
WISP repeater
· WMM (Wi-Fi QoS)
· Information on connected Wi-Fi clients
· Advanced settings
· Guest Wi-Fi / support of MBSSID
· Periodic scan of channels, automatic switch to least loaded channel
· Autonegotiation of channel bandwidth in accordance with environment
conditions (20/40 Coexistence)
Wireless connection rate
· IEEE 802.11b: 1, 2, 5.5, and 11Mbps
· IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
· IEEE 802.11n: from 6.5 to 300Mbps (from MCS0 to MCS15)
Transmitter output power
The maximum value of the transmitter
output power depends upon the radio
frequency regulations applied in your
country
· 802.11b (typical at room temperature 25 °C)
17dBm at 1, 11Mbps
· 802.11g (typical at room temperature 25 °C)
17dBm at 6, 54Mbps
· 802.11n (typical at room temperature 25 °C)
17dBm at MCS0~6
16dBm at MCS7
Page 8 of 175