D-Link DAP-3711

29D-Link DAP-3711 User Manual
Section 3 - Conguration
Click this to change the DAP-3711’s operation
mode, encryption and key. The following page
will pop up:
To set the SSID which the DAP-3711 will broadcast
when it operates in Access Point or Access Point
(WDS) or SSID mode, or the SSID that the DAP-
3711 will attempt to connect to when it operates
in Client or Client (WDS) mode.
When the DAP-3711 is in Access Point or Access
Point (WDS) mode, this function will be displayed.
Use this to hide the broadcast name of the wireless
network to avoid being connected to others. Check
this function; others will not be able to search the
SSID
Edit:
SSID:
Hidden SSID:
Wireless Mode:
DAP-3711 has four different operating modes,
making it adaptable to any situation. Before
setting, please determine which Wireless Model
(Access Point, Client, Access Point (WDS), Client
(WDS)) you want to set the DAP-3711 to
Access
Point:
The DAP-3711 connects directly to
the main Ethernet LAN and receives
connectivity from other wireless
devices. In access point (AP) mode,
802.11a/n/ac compliant devise can
connect to the wireless network.
Client: DAP-3711 is connected to the remote
AP in it. When there are more than
two APs with identical SSID and
encryption in the environment, it
will automatically connect to them.
You can also check the connected
AP information in the “Station List”
on the “Status” page.