D-Link DAP-X1870 User Manual
23
Section 3 - Conguration
Access Point Mode Settings
This page lets you
configure the settings to use the DAP-X1870 as an access point. Connect an Ethernet cable from your router’s
LAN port to the LAN port at the bottom of the DAP-X1870.
To
access this page, click the Settings drop-down menu at the top of the page, and select Extender. Click Save to apply the settings
and return to the home page.
Under Existing Network, choose Ethernet to utilize the DAP-X1870
as an access point. Refer to
“Extender Settings”
on page 28 for
more information
regarding configuration options.
To Next Page
Loading...
Need help?
General
