D-Link DAP-X1870 User Manual

D-Link DAP-X1870 User Manual
38
Section 3 - Conguration
Upgrade
Firmware upgrades may be provided for the DAP-X1870in the future. This page will allow you to upgrade the router’s firmware,
either automatically or manually. To manually upgrade the firmware, you must first download the relevant file from http://support.
dlink.com. To access this page, click the Management drop down menu at the top of the page, and select Upgrade. Click Save at
any time to save the changes you have made on this page.
Firmware
Current Firmware
Version
The current rmware's version will be displayed.
Check for New
Firmware
Click this button to prompt the router to automatically check
for a new rmware version. If a newer version is found, it will
prompt you to install it.
Automatic Firmware Upgrade
Automatic Upgrade If enabled, the router will automatically check for and upgrade
to the newest rmware.
Choose Upgrade Time You may set the DAP-X1870 to automatically upgrade its
firmware at a set time by enabling the function. Set the hour
and minute to automatically upgrade by using the drop-down
menus.
Upgrade Manually
Upgrade Firmware If you wish to upgrade manually, rst download the rmware
le you wish to upgrade to. Next, click the Select File button to
browse to the le and click Upload to install the new rmware.

D-Link DAP-X1870 Specifications

General

Brand	D-Link
Model	DAP-X1870
Category	Extender
Language	English