D-Link DAP-X1870 - Wi-Fi Mesh Setup

D-Link DAP-X1870 User Manual
37
Section 3 - Conguration
System
This page allows you to save or restore your system configuration, reset, or reboot the DAP-X1870. To access this page, click
the Management drop down menu at the top of the page, and select System.
Save Settings To Local
Hard Drive
Load Settings From
Local Hard Drive
Restore to Factory
Default Settings
Save the system settings onto a le to the local hard drive. You
will then see a le dialog where you can select a location and
enter a le name for the conguration le.
Load the system settings from a previously saved le on the
local hard drive. Click the Restore button that appears after
loading the system settings le to load the settings.
Restore the system settings to factory default settings. This
will erase all currently stored settings.
Reboot the Device
Click Reboot to reboot the DAP-X1870.