D-Link DCH-M225 User Manual

28D-Link DCH-M225 User Manual
Section 3 - Conguration
My IPv6
Connection is:
Obtain DNS
Server Address:
Primary DNS
Server:
Secondary DNS
Server:
Select Autoconguration (SLAAC/DHCPv6) to have the
DCH-M225 automatically receive an IPv6 address from the
uplink router.
You can select to Obtain IPv6 DNS Servers automatically,
or you can click Use the following IPv6 DNS Servers and
enter IPv6 DNS server addresses manually.
If you selected the manual option above, enter the Primary
DNS Server address.
If you selected the manual option above, enter the
Secondary DNS Server address. This is optional but will
provide backup if the Primary DNS server fails.
Enter the address of the Primary DNS Server.
Enter the address of the Secondary DNS Server. This is
optional but will provide backup if the primary server fails.
Primary DNS
Server:
Secondary
DNS Server:
IPv6 Device Management Interface
IPv4 Device Management Interface (con’d)

D-Link DCH-M225 Specifications

General

Type	AV transmitter
Antenna type	Internal
Certification	FCC\\r IC\\r Wi-Fi Certified\\r CE
Product color	White
LED indicators	Yes
Maximum resolution	- pixels
Compatible products	DLNA, AirPlay
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA2, WPS
Audio input	1
Frequency	2400 MHz
Connector(s)	3.5mm Audio
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	110-125 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	81.6 g
Dimensions (WxDxH)	54.1 x 41.9 x 54.61 mm