23D-Link DCS-5222L User Manual
Section 4 - Conguration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to
congure your new D-Link Camera and connect the camera
to the Internet. Note that this wizard will not register your
camera with mydlink.com.
Click Next to continue.
Select Automatic IP Address if you want your DHCP server
(usually enabled on your router) to assign the camera its IP
settings. If you want to manually assign the IP settings, select
Static IP Address and enter the following details:
Enter an IP address for your camera.
Enter the subnet mask of your network.
Enter the default gateway address. This is
usually the IP address of your router.
Enter the primary DNS server’s IP address. This
is usually the IP address of your router.
Enter the secondary DNS server’s IP address.
This is optional.
Click Next to continue.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
To Next Page
Loading...
