D-Link DCS-5020L

53D-Link DCS-5222L User Manual
Section 4 - Conguration
System
Click on the Save Conguration button to
save the current conguration to your hard
drive.
To load a saved conguration, click on the
Browse button to select a conguration le
from your hard drive. Then, click the Load
Configuration button to load the new
conguration.
Click this button to reset all settings to their
factory defaults. If you select to reset your
settings, you will need to set up your camera
again.
Clicking the Reboot button will reboot your
device.
This screen allows you to save and restore the camera’s current
conguration. You can also reset all settings to the factory default
or reboot the device.
Save to Local
Hard Drive:
Load from Local
Hard Drive:
Restore
to Factory
Defaults:
Reboot Device: