D-Link DCS-5020L

30D-Link DCS-5222L User Manual
Section 4 - Conguration
Enable:
Only During:
Video Clip Type:
Target:
Check this box to enable the Video Clip Noti-
cation function.
Check this box to setup a scheduled time-
frame when notications should be sent. This
is useful if you do not want to be notied
when it would otherwise be inconvenient,
such as during the night or on weekends.
The Video Clip Wizard uses Prole 2 by de-
fault. More information about video proles
can be found on page 38. You can set the le
type from the drop down menu. You can also
specify how many seconds before the event
that triggered recording should be sent, as
well as how long the maximum duration of
the video clip should be in seconds.
Select where you want the video clip to be
sent. It may either be uploaded to an FTP or
e-mailed to an e-mail address. You will need
to have all of the necessary information lled
out in order to use either of these features.
Click Next to continue.
Video Clip Notications is a feature to send recorded video via
FTP or e-mail when a trigger is activated. This step will only setup
notications to be sent with video clips.