D-Link DCS-5020L

36D-Link DCS-5222L User Manual
Section 4 - Conguration
Dynamic DNS
Click to enable the DDNS function.
Select your Dynamic DNS Server from the
drop-down menu.
Enter the host name of the DDNS server.
Enter your username or e-mail address used
to connect to the DDNS.
Enter your password used to connect to the
DDNS server.
Enter your password again for verication.
You can setup how often the camera noties
the DDNS server of its current global IP
address by entering a whole number in hours.
Displays the connection status of your DDNS
account.
DDNS:
Server Address:
Host Name:
User Name:
Password:
Conrm
Password:
Timeout:
Status:
This section allows you to congure the DDNS setting for your
camera. DDNS will allow all users to access your camera using a
domain name instead of an IP address.